الرجاء الأنتظار ..
جامعة القصيم
عمادة البحث العلمي
 
نظام الحصاد البحثي
الأبحاث المشتركة المنشورة في المجلات الدولية في جامعة القصيم
فضلا مراعات التالي: يتم تحديث البيانات كل 10 ساعات ولذلك قد لا يظهر أي تعديل حدث في خلال تلك الفترة
شروط البحث: الأبحاث المشتركة المنشورة في المجلات الدولية
  • الأبحاث المنشورة بالمجلات العلمية

    • الأبحاث المشتركة المنشورة في المجلات الدولية

      • Al-Aboodi, N. Merah, A. R. Shuaib, Y. Al-Nassar and S. S. Al-Anizi.

        Modeling the Effects of Initial Tube-Tubesheet Clearance, Wall Reduction and Material Strain Hardening on Rolled Joint Strength

        J. Pressure Vessel Technol..
        November 2008 Volume 130, Issue 4, 041204
      • A.S. Al-Aboodi, Nesar Merah, Abdel Rahman N. Shuaib. Yaagoub Al-Nassar.

        FE evaluation of effect of groove geometry on roller and hydraulically expanded joint strength

        International Journal of Precision Technology.
        2009 Vol. 1, No. 2 / 2009, Pages: 201 - 207
      • N. Merah, A. Al-Aboodi, A. N. Shuaib and Y. Al-Nassar.

        Combined Effects of Tube Projection, Initial Tube-Tubesheet Clearance, and Tube Material Strain Hardening on Rolled Joint Strength

        J. Pressure Vessel Technology.
        October 2009 Volume 131, Issue 5, 051201
      • N. Merah, A. Al-Aboodi, A. N. Shuaib and Y. Al-Nassar.

        3-D finite element analysis of roller-expanded heat exchanger tubes in over-enlarged tubesheet holes

        Applied Petrochemical Research.
        January 02 2012 Issn: 2190-5525, Springer Berlin / Heidelberg
      • Gene Q. Blantocas, Abdulaziz S. Al-Aboodi.

        Physicochemically Modifying Wood by Low Energy Hydrogen Ion Shower: An Alternative Plasma-Based Antitermite Method

        Wood and Fiber Science Journal.
        October 2011 Volume 43, Number 4, 449-456
      • Abdel-Raheim, A.E. And Seireg A..

        Vibratory Response And Stability Of Systems Driven By Harmonic Drives

        Machine Vibrations.
        1995 Vol. 3, No. 4 (1995), PP 192-199
      • Abdel-Raheim, A.E. Seireg, A..

        On The Vibratory Response And Stability Of Robotic Arms Utilizing Harmonic Drives

        Machine Vibrations.
        1995 Vol. 3, No. 4 (1995), PP 200-208
      • (1)Hany Ali Sherif, (2)Shawki Hegazi, (3)Mostafa Ismail Jacob.

        Assessment of Vehicle Rollover in Lab.

        SAE International.
        12/4 2010 Paper No. 2010-01-0530
      • Hany Ali Sherif, Samer Kossa.

        Relationship Between Normal and Tangential Contact Stiffness of Nominally Flat Surfaces

        WEAR.
        January 1991 , Vol. 151 , pp.49-62
      • Hany Ali Sherif and Ahmed Shafik Bassiony.

        Non-Linear Identification of Mechanical Systems With Dynamic Dry Friction

        Journal of Sound and Vibration.
        April 1994 Vol. 178 (4), pp. 513-533
      • Hany Ali Sherif and Tayssir Abu Omar.

        Interface Properties Due to Microslip from Vibration Measurement

        ASME Journal of Tribology.
        January 2001 Vol.123, No.1, pp.230-233.
      • Hany Ali Sherif and Tayssir Abu Omar.

        Mechanism of Energy Dissipation in Mechanical Systems with Dry Contact

        Tribology International.
        March 2004 Vol.37, Issue 3, pp.235-244
      • M. Abd-Elwahab and Hany Ali Sherif.

        Pre-tensioned Layer Damping As a New Approach for Vibration Control of Elastic Beams

        ASME Journal of Vibration and Acoustic.
        June 2006 Vol.128 Issue 3, 338
      • Hany Ali Sherif and J.Blouet,J.F.Cretegny, R.Gras, S. Vialard.

        Experimental Investigation of Self-Excited Squeal

        SAE Transactions.
        October 1989 Paper No. 892451, pp. 1855-1863
      • Rais Ahmad and Syed Shakaib Irfan.

        On Completely Generalized Multi-valued Co-variational Inequality Involving Strongly Accretive Operators,

        Filomat.
        2012 Vol. 26(4) Page-657-663
      • Syed Shakaib Irfan and Rais Ahmad.

        Generalized Multivalued Vector Variational-like Inequalities

        Journal of Global Optimization.
        Vol. 46 (1), 25-30 2010
      • Abul Hasan Siddiqi and Syed Shakaib Irfan.

        Completely Generalized Co-complementarity Problems Involving p-Relaxed Accretive Operators with Fuzzy Mappings

        Nonlinear Analysis and Variational Problems, Edited by Pardalos, Rassias & A. Khan, Springer-Verlag, New York.
        pp. 451-462, 2009
      • Abul Hasan Siddiqi and Syed Shakaib Irfan.

        Algorithm for a New System of Completely Generalized Multi-valued Variational Inclusions

        Modeling of Engineering & Technological Problems, Edited by A. H. Siddiqi, A. K. Gupta and M. Brokate., American Institute of Physics, New York.
        pp.365- 374, 2009
      • Rais Ahmad, Farhat Usman and Syed Shakaib Irfan.

        Mixed Variational Inclusions and T-resolvent Equations with Fuzzy Mappings

        Journal of Fuzzy Mathematics,.
        Vol. 17(2) 437- 450, 2009
      • Rais Ahmad, Abul Hasan Siddiqi and Syed Shakaib Irfan.

        Set-valued Variational Inclusions with Fuzzy Mappings in Banach Spaces,

        Journal of Concrete and Applicable Mathematics,.
        Vol. 4(2), 171-181, 2006
      • Rais Ahmad and Syed Shakaib Irfan.

        On Random Completely Generalized Nonlinear Variational-like Inclusions

        Journal of Applied Functional Analysis.
        Vol. 1(3), 293-302, 2006 ISSN: 1559-1948
      • Rais Ahmad and Syed Shakaib Irfan.

        On Generalized Nonlinear Variational-like Inequality Problems,

        Applied Mathematics Letter.
        Vol. 19(3) 294-297, 2006
      • Rais Ahmad and Syed Shakaib Irfan.

        On Completely Generalized Multivalued Nonlinear Co-quasi-variational-like Inclusions

        Computers and Mathematics with Application.
        Vol. 52 (6-7), 1183-1191, 2006
      • R. Ahmad, Q. H. Ansari and S. S. Irfan.

        Generalized Variational Inclusions and Generalized Resolvent Equations in Banach Spaces,

        Computers and Mathematics with Applications,.
        Vol. (49) 1825-1835, 2005
      • Rais Ahmad, Qamrul Hasan Ansari and Syed Shakaib Irfan.

        On Generalized Mixed Co-quasi-variational Inequalities with Noncompact Valued Mappings

        Bulletin of the Australian Mathematical Society,.
        Vol. (70) 7-15, 2004
      • Salahuddin and Syed Shakaib Irfan.

        An Existance Theorem for General Mixed Multivalued Mildly Nonlinear Variational Inequalities without Convexity,

        Mathematical and Computational Applications,.
        Vol. 9(2) 201-203, 2004
      • Salahuddin, Rais Ahmad and Syed Shakaib Irfan.

        Proximal Methods for Generalized Nonlinear Quasi-variational Inclusions,

        Mathematical and Computational Applications,.
        Vol. 9(2) 165-171, 2004
      • Rais Ahmad, Salahuddin and Syed Shskaib Irfan.

        Generalized Quasi-complementarity Problems with Fuzzy Set-valued Mappings,

        International Journal of Fuzzy Systems.
        Vol. 5(3) 194-199, 2003
      • R. Ahmad, A. Khaliq and S. S. Irfan.

        Completely Generalized Nonlinear Variational-like Inclusions with Noncompact Set-valued Mappings

        Nonlinear Analysis Forum.
        Vol. 7(2) 159-166, 2002
      • Mohammad Sajid and Abdullah S. Alsuwaiyan.

        Chaotic Behavior in Real Dynamics of A One Parameter Family of Functions

        International Journal of Applied Science and Engineering.
        2014
      • Elamir S Gadelmawla, Fahad A Al-Mufadi, Abdualaziz S Al-Aboodi.

        Calculation of the machining time of cutting tools from captured images of machined parts using image texture features

        Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
        2014 Vol. 228(2) 203–214
      • M. Muslim, Fahad Al-Mufadi, and Ravi P. Agarwal,.

        Controllability of Abstract Neutral Differential Equations with Deviated Argument

        Dynamics of Continuous, Discrete and Impulsive System, Series A: Mathematical Analysis.
        2013 20, 755-767
      • GA Gamal, FA Al-Mufadi, AH Said.

        Effect of Iron Additives on the Microstructure of Hydroxyapatite

        Engineering, Technology & Applied Science Research.
        2013 Vol 3, No 6 (2013), 532-539
      • Osama Erfan, Al-badrawy Abo El-Nasr and Fahad Al-Mufadi.

        Erosion- corrosion behaviour of AA 6066 Aluminum Alloy

        International Journal of Mechanical Engineering (IJME),ISSN(P): 2319-2240; SSN(E): 2319-2259,.
        Jan 2014 Vol. 3, Issue 1, 15-24
      • F. Al-Mufadi, F. Djavanroodi,.

        Effect of Equal Channel Angular Pressing Process on Impact Property of Pure Copper

        World Academy of Science, Engineering and Technology, International Journal of Chemical, Materials Science and Engineering.
        2014 Vol:8 No:1
      • 2. Ilyas, I.U., Afridi, R., Daud, M., Irfan, M.A., Wazir, N.

        Waste Heat Recovery in Steel Bars Re-Rolling Mill

        European Journal of Scientific Research.
        Dec 2012
      • Irfan, M.A., Schwam, D, Karve, A. and Ryder, R.,.

        Porosity Reduction and Mechanical Properties Improvement in Die Cast Engine Blocks

        Material Science and Engineering- A,.
        2012 Vol. 535 (2012) pp. 108– 114, (Impact Factor 2.319)
      • Ibrahim, U. and Irfan, M.A.,.

        Dynamic Crack Propagation and Arrest in Rapid Prototyping Material

        Rapid Prototyping Journal,.
        2012 Vol. 18:2, 2012. , (Impact Factor 0.662)
      • Irfan, M.A. and Chapman, W.,.

        Thermal Stresses in Radiant Tubes: A Comparison between Recuperative and Regenerative Systems

        Applied Thermal Engineering.
        2010 Vol. 30. Feb 2010. pp. 196-200. (Impact Factor 1.349)
      • Zeb, M.A., Veldhuis, S.C., Irfan, M.A. and Hamid Ullah.

        Comparison Between PVD and CVD+PVD Coated Inserts for Cutting Forces and Tool Wear During Turning of Ramax-2

        Journal of Engineering and Applied Sciences.
        2009 Vol. 28, No.2. 2009. pp. 31-38
      • Zeb, M.A., Irfan, M.A. and Hamid Ullah.

        High Strain Rate Deformation Behavior of AISI 420F

        Journal of Engineering and Applied Sciences,.
        2009 Vol. 28, No.2. 2009. pp. 39-44.
      • Irfan, M.A. and Chapman, W.,.

        Thermal Stresses in Radiant Tubes due to Axial, Circumferential and Radial Temperature Distributions

        Applied Thermal Engineering,.
        2009 Vol. 29. July 2009. pp. 1913-1920. (Impact Factor 1.349)
      • Zeb, M. A. and Irfan, M. A.

        Material Response of RAMAX-2 during HSM using Quick Stop Device

        Experimental Techniques,.
        2009 Vol. 33, No. 2, March/April 2009. (Impact Factor 0.322)
      • Junaid, A., Irfan, M. A., HamidUllah.

        Modeling and Simulation of a Propagating Crack at A Bi-Material Interface under Impact Loading using LS Dyna

        Journal of Engineering and Applied Sciences,.
        2008 Vol. 27, No.1. 2008, pp. 53-61.
      • Martins, C., Irfan, M. A. and Prakash, V.,.

        Dynamic Fracture of Linear Medium Density Polyethylene under Impact Loading Conditions

        Material Science and Engineering A,.
        2007 Volume 465, Issues 1-2, 15 September 2007, pp. 211-222. (Impact Factor 1.490)
      • HamidUllah, Irfan, M. A. and Prakash.

        State and Rate Dependent Friction Laws for Modeling High Speed Frictional Slip at Metal-on-Metal Interfaces

        Journal of Tribology,.
        January 2007 January 2007, Volume 129, Issue 1, pp. 17-22. (Impact Factor 0.541)
      • Hamid Ullah, Bohez, E.L.J. and Irfan, M. A..

        Assembly Features: definition, classification, and usefulness in sequence planning

        International Journal of Industrial and Systems Engineering (IJISE),.
        2009 Vol. 4, No. 2, 2009. pp. 111-132
      • HamidUllah and Irfan, M. A.,.

        Comparison of Linker & Dieterich Friction Models with Prakash Models for Simulation of High-Speed Friction

        Journal of Engineering and Applied Sciences, ,.
        2005 Vol. 24, No.1 Jan- June 2005, pp. 59 – 66.
      • Liou, N. S., Okada, M., Irfan, M. A. and Prakash, V.

        Transient Thermo-mechanical Interactions during High-Speed Slip at Metal-to-Metal Interface

        Optics and Lasers in Engineering,.
        2003 October 2003, Vol. 40, no. 4. pp. 393-437 Elsevier Science. (Impact Factor 0.935)
      • Irfan, M.A. and Prakash, V.

        Dynamic Deformation and Fracture Behavior of Novel Damage Tolerant Discontinuously Reinforced Aluminum Composites

        Intl. J. of Solids and Structures,.
        2000 Vol. 37(33), pp. 4477-4507, August 2000. (Impact Factor 1.378)
      • Irfan, M.A. and Prakash, V.

        Time Resolved Friction During Dry Sliding of Metal on Metal,

        Intl. J. of Solids and Structures,.
        2000 Vol. 37(20) pp. 2859-2882, May 2000. (Impact Factor 1.378)
      • Rajagopalan, S., Okada, M., Irfan, M.A. and Prakash, V.

        Novel Experimental Techniques for Investigating Time Resolved High Speed Friction

        Wear, Vol. 225-229,.
        1999 pp. 1222-1237. 1999. (Impact Factor 1.082)
      • Irfan, M., Pervez, M. and Ahmad, I.

        Optimization of Winding Pattern for Impact Strength of Composite Tube

        Journal of Engineering and Applied Sciences,.
        1992 pp. 19-25, July 1992.
      • Almufadi, F. and Irfan, M. A..

        Frequency analysis of volumetric porosity in aluminum castings at high and low cooling rates

        Materials Testing.
        May 2015 57 (5), 398-401, . doi: 10.3139/120.110727
      • Almufadi, F. and Irfan, M. A..

        Effect of cooling rates on the three-dimensional porosity in permanent mold castings measured by computed tomography

        Materials Evaluation.
        May 2015 Vol. 73, No. 5, pp. 603-610.
      • Alyahya, S. and Irfan, M.A..

        The Techno-Economic Potential of Saudi Arabia's Solar Industry

        Renewable and Sustainable Energy Reviews.
        March 2016 Vol. 55C, , pp. 697-702. doi: 10.1016/j.rser.2015.11.017.
      • Alyahya, S. and Irfan, M.A..

        The Role of Saudi Universities in Achieving the Solar Potential 2030 Target

        Energy Policy.
        April 2016 Vol. 91, April 2016, pp. 325-328. doi:10.1016/j.enpol.2016.01.019.
      • Alyahya, S. and Irfan, M.A.

        Analysis from the New Solar Radiation Atlas for Saudi Arabia

        Solar Energy.
        June 2016 Vol. 130, June 2016. pp. 116-127. doi: 10.1016/j.solener.2016.01.053
      • Sulaiman Al Yahya, Mohammad A. Irfan.

        Developing an Ecosystem for Quality Education in Qassim University

        European Journal of Social Sciences.
        Feb 2013 Volume 37 No 2 February, 2013
      • Yahya, S..

        Theoretical Prediction for the Solar Intensity in KSA

        In Press.
        2011
      • Sulaiman AlYahya.

        Utilization of date pits as a potential source of biogas and organic fertilizer

        Food, Agri., and Environment.
        2004 2(2):369-374
      • Sulaiman AlYahya.

        A quick method for measuring date moisture content

        Trans. Of American society for Ag. Engineers,.
        2003 46(2):401-405
      • Sulaiman AlYahya.

        Effect of storage conditions on germination in wheat

        Agronomy and Crop scince.
        2001 J. 186:273-279
      • Yahya, S..

        Deterioration rates of wheat as measured by CO2 production

        Ag. Mech. In Asia, Africa, and Latin America 32(2):41-47 ( Japan).
        2001
      • Yahya, S..

        Deterioration rates of wheat as measured by CO2 production

        Ag. Mech. In Asia, Africa, and Latin America 32(2):41-47 ( Japan).
        2001
      • Yahya, S..

        Estimating harvesting time of wheat crop under field conditions of Al-Gassim area - Saudi Arabia

        Alex. Univ. J. , 44(12). ( Egypt).
        1999
      • Yahya, S..

        Estimating moisture content for dates by the oven

        Assut Univ. 9-11 Nov, 1999. P. 163-174( Egypt).
        1999
      • Yahya, S..

        Sugar extraction from Al-Gassim dates in Saudi Arabia

        Assut Univ. J( Egypt).
        1999
      • Yahya, S..

        Quality chang of barhy dates during storage at bisir stage

        Mansoura Univ. J. 24(10): 5621-5628. ( Egypt).
        1999
      • Yahya, S..

        Change of fungal infection during wheat storage at different conditions

        Arabian universities cooperation J. for studies and agri. Research, 7(2) : 55-58.(UAE).
        1999
      • Yahya, S..

        Deterioration rates as measured by CO2 production.

        Canada J. Agricultural Engineering 41(3): 161-166.(Canada).
        1999
      • Yahya, S..

        Static pressure drop through barley grain

        Canadian Agricultural Engineering,40(2):213-217.(Canada).
        1998
      • Yahya, S..

        Natural grain drying under arid-region condition of Saudi Arabia

        AMA, 29(1):55-58.(Japan).
        1998
      • Yahya, S..

        Summaries of dry and wet bulb temperatures in Saudi Arabia

        Misr , J. Ag. Eng., 13(3): 647- 659. ( Egypt).
        1998
      • Yahya, S..

        Reconditioning over-dried wheat

        AMA,26(4):74-76. .(Japan).
        1995
      • Yahya, S..

        Effect of storage temperatures on pop corn volume

        Misr , J. Ag. Eng., 9(4): 463-478. ( Egypt).
        1992
      • Yahya, S..

        The effect of mechanical damage on Carbon dioxide production and oxygen consumption in stored corn

        Misr , J. Ag. Eng., 9(4): 479-490. ( Egypt).
        1992
      • Yahya, S..

        Browning effects from dehydrating mushrooms in vacuum oven as compared to forced air dehydration

        Misr,J. Ag. Eng., 9(4) : 511-524. ( Egypt).
        1992
      • Yahya, S..

        Reconditioning overdried barley

        Alex. J. Agric. Res. 39(2): 21-35. ( Egypt).
        1994
      • Yahya, S..

        Simulation of ambient-air drying of fungicide-treated high-moisture corn in lowa

        Transactions of the ASAE 34(3) 944-949. . (America).
        1991
      • Yahya, S..

        Simulation of natural-air drying of fungicide-treated high- moisture corn in lowa

        ASAE paper No.916556. . (America).
        1991
      • Yahya, S..

        Carbon-dioxide evolution of fungicide-treated high-moisture corn

        ASAE paper No.916557. . (America).
        1991
      • Yahya, S..

        Aspirator separation of corn fine – mixtures

        ASAE paper No.906054. . (America).
        1990
      • Irfan Ullah and S. Kota.

        Optimal synthesis of mechanisms for path generation using Fourier Descriptors and global search methods

        Trans. ASME Journal of Mechanical Design.
        December 1997 Vol 119, No.4, pp 504-510
      • S Noor, M K Khan, I Hussain and Irfan Ullah.

        Application of Simulation and Artificial Neural Network to the Problem of Scheduling of Flexible Manufacturing Systems

        International Journal of INGENIUM.
        2005
      • Irfan Ullah, Qamar-uz-Zaman Chaudhry and Andrew J Chipperfield.

        An Evaluation of Wind Energy Potential at Kati Bandar, Pakistan

        Renewable and Sustainable Energy Reviews.
        February 2010 Vol. 14, No. 2
      • Alshitawi, M., Awbi, H. and Mahyuddin, N.

        Particulate matter mass concentration (PM10) under different ventilation methods in classrooms

        International Journal of Ventilation.
        2009
      • Mohammed Alshitawi & Hazim Awbi.

        Measurement and prediction of the effect of students’ activities on airborne particulate concentration in a classroom

        HVAC&R Research.
        Aug 17 2011
      • N. Mahyuddin, H. B. Awbi and M. Alshitawi.

        The spatial distribution of carbon dioxide in rooms with particular application to classrooms

        Indoor and Built Environment.
        May 2014
      • F. Djavanroodi, S. Karegarnejad.

        Failure assessment of Nimonic 80A gas turbine blade

        Engineering Failure Analysis.
        2012
      • Milad Janbakhsh, Faramarz Djavanroodi and Mohammad Riahi.

        A comparative study on determination of forming limit diagrams for industrial aluminium sheet alloys considering combined effect of strain path, anisotropy and yield locus

        The Journal of Strain Analysis for Engineering Design.
        2012
      • A. Sadjadi, M. Ebrahim, F. Djavanroodi.

        Experimental and numerical investigation of Al properties fabricated by CGP process

        Materials Science and Engineering A.
        2012
      • M. Borhani, F. Djavanroodi.

        Rubber pad-constrained groove pressing process: Experimental and finite element investigation

        Materials Science and Engineering A.
        2012
      • F. Djavanroodi, M. Daneshtalab, M. Ebrahimi.

        A novel technique to increase strain distribution homogeneity for ECAPed materials

        Materials Science and Engineering A.
        2012
      • F. Djavanroodi, A. Sadjadi, M. Borhani.

        Experimental and numerical investigation of goved pressed UFG pre aluminum

        Int J Advanced Design and Manufacturing Technology.
        2012
      • F. Djavanroodi, A. Derogar.

        Artificial neural network modeling of forming limit diagram

        Materials and Manufacturing Processes.
        2011
      • H. R. Molladavoudi, F. Djavanroodi.

        Experimental study of thickness reduction effects on mechanical properties and spinning accuracy of aluminum 7075-O, during flow forming

        International Journal Advance Manufacturing Technology.
        2011
      • F. Djavanroodi, M. Ebrahimi, B. Rajabifar, S. Akramizadeh.

        Fatigue design factors for ECAPed materials

        Materials Science and Engineering A.
        2010
      • F. Djavanroodi, M. Ebrahimi, B. Rajabifar, S. Akramizadeh.

        Fatigue design factors for ECAPed materials

        Materials Science and Engineering A.
        2010
      • F. Djavanroodi, M. Ebrahimi.

        Effect of die parameters and material properties in ECAP with parallel channels

        Materials Science and Engineering A.
        2010
      • M. Mazaheri, F. Djavanroodi, K.M. Nikbin.

        Creep life assessment of an overheated 9Cr-1Mo steel tube

        International Journal of Pressure Vessels and Piping.
        2010
      • F. Djavanroodi, M. Ebrahimi.

        Effect of die channel angle, friction and back pressure in the equal channel angular pressing using 3D finite element simulation

        Materials Science and Engineering A.
        2010
      • F. Djavanroodi, Sh. Abbasnejad D., H. Nezami E..

        Deep drawing of aluminum alloys using a novel hydroforming tooling

        Materials and Manufacturing Processes.
        2011
      • F. Djavanroodi, A. Pirgholi, and E. Derakhshani.

        FEM and ANN Analysis in Fine-Blanking Process

        Materials and Manufacturing Processes.
        2010
      • F. Djavanroodi, A. Derogar.

        Experimental and numerical evaluation of forming limit diagram for Ti6Al4V titanium and Al6061-T6 aluminum alloys sheets

        ”, Materials and Design.
        2010
      • F. Djavanroodi, M. Ebrahimi.

        Investigation of strain behavior in the modified equal channel angular pressing die by 3D finite element method

        Journal of Applied Science.
        2010
      • A. Pirgholi, E. Derakhshani, K. Abrinia and F. Djavanroodi.

        Study in effect of different parameters in fine-blanking process with FEM and its formulation based on ANN

        Modares Technical and Engineering.
        2010
      • H. Nezami, F. Djavanroodi & D. Sh. Abbasnejad.

        Experimental and numerical analysis for hydroformingTi6A14V alloy used in aerospace, Assisted by floating disk

        Journal of Applied Science.
        2009
      • Ghafoori Ahangarar, R. Djavanroodi, F. Pakbaz, M..

        Parameter affecting hydroforming deep drawing and comparison of common deep drawing methods using FEM

        Modares Technical and Engineering.
        2008
      • Djavanroodi, F. Sabeghi, M and Abrinia, K..

        Analysis of the Parameters Affecting Warping In Radial Forging Process

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. Gheisary, M..

        Fracture and spring back on Double Bulge Tube Hydro-Forming

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. Sabeghi, M and Abrinia, K..

        Analysis of the Parameters Affecting Warping In Radial Forging Process

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. Gheisary, M..

        Fracture and spring back on Double Bulge Tube Hydro-Forming

        American Journal of Applied Sciences.
        2008
      • Abrinia, K. Naee, H. Sadeghi, F. and Djavanroodi, F..

        New Analysis for the FGM Thick Cylinders under Combined Pressure and Temperature Loading

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. Gheisary, M. and Zoghi-shal, H.

        Analytical and Numerical analysis of Free Bulge Tube Hydroforming

        American Journal of Applied Sciences.
        2008
      • Gowhari-Anaraki, A. R. Djavanroodi, F. Shadlou, S..

        Estimation of C*-Integral for Radial Cracks in Annular Discs under Constant Angular Velocity and Internal Pressure

        American Journal of Applied Sciences.
        2008
      • Gowhari-Anaraki, A. R. Djavanroodi, F. Shadlou, S.

        Estimation of C*-Integral in a thin T-section subjected to projection and remote loading based on elastic concentration factor

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. and Nikbin, K. M..

        The Fracture Mechanics Concept of Creep and Creep/Fatigue Crack Growth in Life Assessment

        International Journal of Engineering Science..
        2006
      • Adil Jhangeer, Fahad Al-Mufadi.

        On the classification of (1+n)-dimensional non-linear Klein-Gordon equation via Lie and Noether approach

        Journal of Advances in Mathematics.
        2016
      • A. Jhangeer, M. Farasat Shamir, Tayyaba Naz and Nazish Iftikhar.

        Classification of Cosmic Scale Factor via Noether Gauge Symmetries

        Inter. J Theor. Phy.
        June 2015
      • A. Jhangeer, Tayyaba Naz and Nazish Iftikhar.

        Classification of Static Plane Symmetric Spacetime via Noether Gauge Symmetries

        Int. J. Geom. Methods Mod. Phys.
        2016
      • A. Jhangeer, Tayyaba Naz.

        Noether Gauge Symmetries for Petrov Type D-Levi-Civita Space-Time in Spherical and Cylindrical Coordinates

        Journal of Gravity.
        2016
      • A Jhangeer, R Jarral.

        Conserved Quantities of Non-Linear Third Order Systems of PDEs

        World Appl. Sci. J.
        2016
      • Muhammad Alim Abdulwahhab and A. Jhangeer.

        Symmetries and generalized higher order conserved vectors of the wave equation on Bianchi I spacetime

        Int. J. Geom. Methods Mod. Phys.
        2016
 
 
  عدد زيارات هذا الموقع 4987199
جميع الحقوق محفوظة لعمادة البحث العلمي بجامعة القصيم ©