الرجاء الأنتظار ..
جامعة القصيم
عمادة البحث العلمي
 
نظام الحصاد البحثي
الحصاد البحثي لقسم الهندسة الميكانيكة في جامعة القصيم
فضلا مراعات التالي: يتم تحديث البيانات كل 10 ساعات ولذلك قد لا يظهر أي تعديل حدث في خلال تلك الفترة
شروط البحث: قسم: الهندسة الميكانيكة
  • الأبحاث المنشورة بالمجلات العلمية

    • الأبحاث الفردية المنشورة في المجلات الدولية

      • .Hany Ali Sherif.

        Mode of Zero Wear in Mechanical Systems with Dry Contact

        Tribology International.
        June 2004 Vol.3, Issue 1, pp.59-68.
      • Hany Ali Sherif.

        Investigation on Effect of Surface Topography of Brake Pad/Disc Assembly on Squeal Generation .

        WEAR,.
        June 2004 Vol. 257 (7-8), pp.687-695
      • Hany Ali Sherif.

        Determination of Ball and Roller Compliance Using a Vibration Measuring Technique

        ASME Journal of Tribology.
        January 1995 Vol.117 No.3 , pp. 553-557
      • Hany Ali Sherif.

        Effect of contact stiffness on the establishment of self-excited vibrations

        Wear.
        January 1991 Vol.141, Issue 2, pp.227-234
      • Hany Ali Sherif.

        Parameters Affecting Contact Stiffness of Nominally Flat Surfaces .

        WEAR,.
        April 1991 Vol.145 , pp. 113-121
      • Hany Ali Sherif.

        On the Design of Anti-Squeal Friction Pads for Disc Brakes

        SAE international.
        February 1991 Vol. 100, no6, pp. 678-686
      • Hany Ali Sherif.

        Free Flexural Vibrations of Clamped Circular Sandwich Plate

        Journal of Sound and Vibration.
        September 1992 Vol. 157 (3), pp. 531-537
      • Hany Ali Sherif.

        Non-Linear Forced Flexural Vibrations of a Clamped Circular Unsymmetrical Sandwich Plate

        Journal of Sound and vibration.
        January 1995 Vol. 182 (3), pp. 495-503
      • Al-Badrawy A. Abo El-Nasr and Mohamed Ayad.

        Structural Changes Of Al-6%Ti Alloy After Hot Extrusion And Elevated Temperature Creep

        Materials Science; An Indian Journal.
        Vol. 8, Issue 2 2012
      • Sulaiman Al-Yahya and Al-Badrawy A. Abo El-Nasr.

        ABET Accreditation Experiences in Department of Mechanical Engineering, College of Engineering, Qassim University

        Staff and Educational Development International.
        May 2012
      • Djavanroodi, F..

        Creep-Fatigue Crack Growth Interaction in Nickel Base Supper Alloy

        American Journal of Applied Sciences.
        2008
      • Syed Shakaib Irfan.

        On Completely Generalized Co-quasi-variational Inequalities

        Applied & Computational Mathematics.
        2013 Vol. 2(1), page 14-18.
      • A. Jhangeer.

        Conservation laws for the (1 + 2)-dimensional wave equation in biological environment

        Acta Mathematica Scientia.
        9/30 2013
      • M. Farasat Shamir · Adil Jhangeer · Akhlaq Ahmad Bhatti.

        Killing and Noether Symmetries of Plane Symmetric Spacetime

        International Journal of Theoretical Physics.
        1st sep 2013
      • A. Jhangeer.

        Effect of background geometry on symmetries of the ( 1 + 2 ) -dimensional heat equation and reductions of the TDGL model

        Afrika Matematika.
        6th Nov 2012
      • A Jhangeer, S Sharif.

        Conserved quantities for the non-linear Klein–Gordon equation

        Afrika Matematika.
        31st March 2013
      • Mohammad Sajid.

        Singular Values of One Parameter Family of Generalized Generating Function of Bernoulli's Numbers

        Applied Mathematics & Information Sciences.
        2015 DOI: 10.12785/amis/090619
      • Mohammad Sajid.

        Singular Values of One Parameter Family lambda (b^z-1)/z

        Journal of Mathematics and Computer Science.
        2015
      • Mohammad Sajid.

        Singular Values of One Parameter Family \lambda (z/(e^z-1))^m

        International Mathematics Forum.
        2015 DOI: 10.12988/imf.2015.5319
      • Mohammad Sajid.

        Singular Values of One Parameter Family \lambda ((e^z-1)/z)^m

        International Journal of Applied Mathematical Research.
        2015 DOI: 10.14419/ijamr.v4i2.4359
      • Mohammad Sajid.

        On Real Fixed Points of One Parameter Family of Function x/(b^x-1)

        Tamkang Journal of Mathematics.
        2015 DOI: 10.5556/j.tkjm.45.2014.1577
      • Mohammad Sajid.

        Singular Values and Fixed Points of Family of Generating Function of Bernoulli's Numbers

        J. Nonlinear Sci. Appl..
        2015
      • Mohammad Sajid.

        Singular Values and Real Fixed Points of One Parameter Family of Function zb^z/(b^z-1)

        Journal of Mathematics and System Science.
        2014
      • Mohammad Sajid.

        On Fixed Points of One Parameter Family of Function x/(b^x-1) II

        Int. Journal of Math. Analysis.
        2014
    • الأبحاث المشتركة المنشورة في المجلات الدولية

      • Mohammad Sajid and Abdullah S. Alsuwaiyan.

        Chaotic Behavior in Real Dynamics of A One Parameter Family of Functions

        International Journal of Applied Science and Engineering.
        2014
      • Almufadi, F. and Irfan, M. A..

        Frequency analysis of volumetric porosity in aluminum castings at high and low cooling rates

        Materials Testing.
        May 2015 57 (5), 398-401, . doi: 10.3139/120.110727
      • Almufadi, F. and Irfan, M. A..

        Effect of cooling rates on the three-dimensional porosity in permanent mold castings measured by computed tomography

        Materials Evaluation.
        May 2015 Vol. 73, No. 5, pp. 603-610.
      • Alyahya, S. and Irfan, M.A..

        The Techno-Economic Potential of Saudi Arabia's Solar Industry

        Renewable and Sustainable Energy Reviews.
        March 2016 Vol. 55C, , pp. 697-702. doi: 10.1016/j.rser.2015.11.017.
      • Alyahya, S. and Irfan, M.A..

        The Role of Saudi Universities in Achieving the Solar Potential 2030 Target

        Energy Policy.
        April 2016 Vol. 91, April 2016, pp. 325-328. doi:10.1016/j.enpol.2016.01.019.
      • Alyahya, S. and Irfan, M.A.

        Analysis from the New Solar Radiation Atlas for Saudi Arabia

        Solar Energy.
        June 2016 Vol. 130, June 2016. pp. 116-127. doi: 10.1016/j.solener.2016.01.053
      • N. Mahyuddin, H. B. Awbi and M. Alshitawi.

        The spatial distribution of carbon dioxide in rooms with particular application to classrooms

        Indoor and Built Environment.
        May 2014
      • Sulaiman Al Yahya, Mohammad A. Irfan.

        Developing an Ecosystem for Quality Education in Qassim University

        European Journal of Social Sciences.
        Feb 2013 Volume 37 No 2 February, 2013
      • Rais Ahmad and Syed Shakaib Irfan.

        On Completely Generalized Multi-valued Co-variational Inequality Involving Strongly Accretive Operators,

        Filomat.
        2012 Vol. 26(4) Page-657-663
      • 2. Ilyas, I.U., Afridi, R., Daud, M., Irfan, M.A., Wazir, N.

        Waste Heat Recovery in Steel Bars Re-Rolling Mill

        European Journal of Scientific Research.
        Dec 2012
      • Adil Jhangeer, Fahad Al-Mufadi.

        On the classification of (1+n)-dimensional non-linear Klein-Gordon equation via Lie and Noether approach

        Journal of Advances in Mathematics.
        2016
      • A. Jhangeer, M. Farasat Shamir, Tayyaba Naz and Nazish Iftikhar.

        Classification of Cosmic Scale Factor via Noether Gauge Symmetries

        Inter. J Theor. Phy.
        June 2015
      • A. Jhangeer, Tayyaba Naz and Nazish Iftikhar.

        Classification of Static Plane Symmetric Spacetime via Noether Gauge Symmetries

        Int. J. Geom. Methods Mod. Phys.
        2016
      • A. Jhangeer, Tayyaba Naz.

        Noether Gauge Symmetries for Petrov Type D-Levi-Civita Space-Time in Spherical and Cylindrical Coordinates

        Journal of Gravity.
        2016
      • A Jhangeer, R Jarral.

        Conserved Quantities of Non-Linear Third Order Systems of PDEs

        World Appl. Sci. J.
        2016
      • Muhammad Alim Abdulwahhab and A. Jhangeer.

        Symmetries and generalized higher order conserved vectors of the wave equation on Bianchi I spacetime

        Int. J. Geom. Methods Mod. Phys.
        2016
      • Yahya, S..

        Deterioration rates of wheat as measured by CO2 production

        Ag. Mech. In Asia, Africa, and Latin America 32(2):41-47 ( Japan).
        2001
      • Yahya, S..

        Deterioration rates of wheat as measured by CO2 production

        Ag. Mech. In Asia, Africa, and Latin America 32(2):41-47 ( Japan).
        2001
      • Yahya, S..

        Estimating harvesting time of wheat crop under field conditions of Al-Gassim area - Saudi Arabia

        Alex. Univ. J. , 44(12). ( Egypt).
        1999
      • Yahya, S..

        Estimating moisture content for dates by the oven

        Assut Univ. 9-11 Nov, 1999. P. 163-174( Egypt).
        1999
      • Yahya, S..

        Sugar extraction from Al-Gassim dates in Saudi Arabia

        Assut Univ. J( Egypt).
        1999
      • Yahya, S..

        Quality chang of barhy dates during storage at bisir stage

        Mansoura Univ. J. 24(10): 5621-5628. ( Egypt).
        1999
      • Yahya, S..

        Change of fungal infection during wheat storage at different conditions

        Arabian universities cooperation J. for studies and agri. Research, 7(2) : 55-58.(UAE).
        1999
      • Yahya, S..

        Deterioration rates as measured by CO2 production.

        Canada J. Agricultural Engineering 41(3): 161-166.(Canada).
        1999
      • Yahya, S..

        Static pressure drop through barley grain

        Canadian Agricultural Engineering,40(2):213-217.(Canada).
        1998
      • Yahya, S..

        Natural grain drying under arid-region condition of Saudi Arabia

        AMA, 29(1):55-58.(Japan).
        1998
      • Yahya, S..

        Summaries of dry and wet bulb temperatures in Saudi Arabia

        Misr , J. Ag. Eng., 13(3): 647- 659. ( Egypt).
        1998
      • Yahya, S..

        Reconditioning over-dried wheat

        AMA,26(4):74-76. .(Japan).
        1995
      • Yahya, S..

        Effect of storage temperatures on pop corn volume

        Misr , J. Ag. Eng., 9(4): 463-478. ( Egypt).
        1992
      • Yahya, S..

        The effect of mechanical damage on Carbon dioxide production and oxygen consumption in stored corn

        Misr , J. Ag. Eng., 9(4): 479-490. ( Egypt).
        1992
      • Yahya, S..

        Browning effects from dehydrating mushrooms in vacuum oven as compared to forced air dehydration

        Misr,J. Ag. Eng., 9(4) : 511-524. ( Egypt).
        1992
      • Yahya, S..

        Reconditioning overdried barley

        Alex. J. Agric. Res. 39(2): 21-35. ( Egypt).
        1994
      • Yahya, S..

        Simulation of ambient-air drying of fungicide-treated high-moisture corn in lowa

        Transactions of the ASAE 34(3) 944-949. . (America).
        1991
      • Yahya, S..

        Simulation of natural-air drying of fungicide-treated high- moisture corn in lowa

        ASAE paper No.916556. . (America).
        1991
      • Yahya, S..

        Carbon-dioxide evolution of fungicide-treated high-moisture corn

        ASAE paper No.916557. . (America).
        1991
      • Yahya, S..

        Aspirator separation of corn fine – mixtures

        ASAE paper No.906054. . (America).
        1990
      • Irfan Ullah and S. Kota.

        Optimal synthesis of mechanisms for path generation using Fourier Descriptors and global search methods

        Trans. ASME Journal of Mechanical Design.
        December 1997 Vol 119, No.4, pp 504-510
      • S Noor, M K Khan, I Hussain and Irfan Ullah.

        Application of Simulation and Artificial Neural Network to the Problem of Scheduling of Flexible Manufacturing Systems

        International Journal of INGENIUM.
        2005
      • Irfan Ullah, Qamar-uz-Zaman Chaudhry and Andrew J Chipperfield.

        An Evaluation of Wind Energy Potential at Kati Bandar, Pakistan

        Renewable and Sustainable Energy Reviews.
        February 2010 Vol. 14, No. 2
      • Alshitawi, M., Awbi, H. and Mahyuddin, N.

        Particulate matter mass concentration (PM10) under different ventilation methods in classrooms

        International Journal of Ventilation.
        2009
      • Mohammed Alshitawi & Hazim Awbi.

        Measurement and prediction of the effect of students’ activities on airborne particulate concentration in a classroom

        HVAC&R Research.
        Aug 17 2011
      • Al-Aboodi, N. Merah, A. R. Shuaib, Y. Al-Nassar and S. S. Al-Anizi.

        Modeling the Effects of Initial Tube-Tubesheet Clearance, Wall Reduction and Material Strain Hardening on Rolled Joint Strength

        J. Pressure Vessel Technol..
        November 2008 Volume 130, Issue 4, 041204
      • A.S. Al-Aboodi, Nesar Merah, Abdel Rahman N. Shuaib. Yaagoub Al-Nassar.

        FE evaluation of effect of groove geometry on roller and hydraulically expanded joint strength

        International Journal of Precision Technology.
        2009 Vol. 1, No. 2 / 2009, Pages: 201 - 207
      • N. Merah, A. Al-Aboodi, A. N. Shuaib and Y. Al-Nassar.

        Combined Effects of Tube Projection, Initial Tube-Tubesheet Clearance, and Tube Material Strain Hardening on Rolled Joint Strength

        J. Pressure Vessel Technology.
        October 2009 Volume 131, Issue 5, 051201
      • N. Merah, A. Al-Aboodi, A. N. Shuaib and Y. Al-Nassar.

        3-D finite element analysis of roller-expanded heat exchanger tubes in over-enlarged tubesheet holes

        Applied Petrochemical Research.
        January 02 2012 Issn: 2190-5525, Springer Berlin / Heidelberg
      • Gene Q. Blantocas, Abdulaziz S. Al-Aboodi.

        Physicochemically Modifying Wood by Low Energy Hydrogen Ion Shower: An Alternative Plasma-Based Antitermite Method

        Wood and Fiber Science Journal.
        October 2011 Volume 43, Number 4, 449-456
      • Elamir S Gadelmawla, Fahad A Al-Mufadi, Abdualaziz S Al-Aboodi.

        Calculation of the machining time of cutting tools from captured images of machined parts using image texture features

        Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
        2014 Vol. 228(2) 203–214
      • M. Muslim, Fahad Al-Mufadi, and Ravi P. Agarwal,.

        Controllability of Abstract Neutral Differential Equations with Deviated Argument

        Dynamics of Continuous, Discrete and Impulsive System, Series A: Mathematical Analysis.
        2013 20, 755-767
      • GA Gamal, FA Al-Mufadi, AH Said.

        Effect of Iron Additives on the Microstructure of Hydroxyapatite

        Engineering, Technology & Applied Science Research.
        2013 Vol 3, No 6 (2013), 532-539
      • Osama Erfan, Al-badrawy Abo El-Nasr and Fahad Al-Mufadi.

        Erosion- corrosion behaviour of AA 6066 Aluminum Alloy

        International Journal of Mechanical Engineering (IJME),ISSN(P): 2319-2240; SSN(E): 2319-2259,.
        Jan 2014 Vol. 3, Issue 1, 15-24
      • F. Al-Mufadi, F. Djavanroodi,.

        Effect of Equal Channel Angular Pressing Process on Impact Property of Pure Copper

        World Academy of Science, Engineering and Technology, International Journal of Chemical, Materials Science and Engineering.
        2014 Vol:8 No:1
      • F. Djavanroodi, S. Karegarnejad.

        Failure assessment of Nimonic 80A gas turbine blade

        Engineering Failure Analysis.
        2012
      • Milad Janbakhsh, Faramarz Djavanroodi and Mohammad Riahi.

        A comparative study on determination of forming limit diagrams for industrial aluminium sheet alloys considering combined effect of strain path, anisotropy and yield locus

        The Journal of Strain Analysis for Engineering Design.
        2012
      • A. Sadjadi, M. Ebrahim, F. Djavanroodi.

        Experimental and numerical investigation of Al properties fabricated by CGP process

        Materials Science and Engineering A.
        2012
      • M. Borhani, F. Djavanroodi.

        Rubber pad-constrained groove pressing process: Experimental and finite element investigation

        Materials Science and Engineering A.
        2012
      • F. Djavanroodi, M. Daneshtalab, M. Ebrahimi.

        A novel technique to increase strain distribution homogeneity for ECAPed materials

        Materials Science and Engineering A.
        2012
      • F. Djavanroodi, A. Sadjadi, M. Borhani.

        Experimental and numerical investigation of goved pressed UFG pre aluminum

        Int J Advanced Design and Manufacturing Technology.
        2012
      • F. Djavanroodi, A. Derogar.

        Artificial neural network modeling of forming limit diagram

        Materials and Manufacturing Processes.
        2011
      • H. R. Molladavoudi, F. Djavanroodi.

        Experimental study of thickness reduction effects on mechanical properties and spinning accuracy of aluminum 7075-O, during flow forming

        International Journal Advance Manufacturing Technology.
        2011
      • F. Djavanroodi, M. Ebrahimi, B. Rajabifar, S. Akramizadeh.

        Fatigue design factors for ECAPed materials

        Materials Science and Engineering A.
        2010
      • F. Djavanroodi, M. Ebrahimi, B. Rajabifar, S. Akramizadeh.

        Fatigue design factors for ECAPed materials

        Materials Science and Engineering A.
        2010
      • F. Djavanroodi, M. Ebrahimi.

        Effect of die parameters and material properties in ECAP with parallel channels

        Materials Science and Engineering A.
        2010
      • M. Mazaheri, F. Djavanroodi, K.M. Nikbin.

        Creep life assessment of an overheated 9Cr-1Mo steel tube

        International Journal of Pressure Vessels and Piping.
        2010
      • F. Djavanroodi, M. Ebrahimi.

        Effect of die channel angle, friction and back pressure in the equal channel angular pressing using 3D finite element simulation

        Materials Science and Engineering A.
        2010
      • F. Djavanroodi, Sh. Abbasnejad D., H. Nezami E..

        Deep drawing of aluminum alloys using a novel hydroforming tooling

        Materials and Manufacturing Processes.
        2011
      • F. Djavanroodi, A. Pirgholi, and E. Derakhshani.

        FEM and ANN Analysis in Fine-Blanking Process

        Materials and Manufacturing Processes.
        2010
      • F. Djavanroodi, A. Derogar.

        Experimental and numerical evaluation of forming limit diagram for Ti6Al4V titanium and Al6061-T6 aluminum alloys sheets

        ”, Materials and Design.
        2010
      • F. Djavanroodi, M. Ebrahimi.

        Investigation of strain behavior in the modified equal channel angular pressing die by 3D finite element method

        Journal of Applied Science.
        2010
      • A. Pirgholi, E. Derakhshani, K. Abrinia and F. Djavanroodi.

        Study in effect of different parameters in fine-blanking process with FEM and its formulation based on ANN

        Modares Technical and Engineering.
        2010
      • H. Nezami, F. Djavanroodi & D. Sh. Abbasnejad.

        Experimental and numerical analysis for hydroformingTi6A14V alloy used in aerospace, Assisted by floating disk

        Journal of Applied Science.
        2009
      • Ghafoori Ahangarar, R. Djavanroodi, F. Pakbaz, M..

        Parameter affecting hydroforming deep drawing and comparison of common deep drawing methods using FEM

        Modares Technical and Engineering.
        2008
      • Djavanroodi, F. Sabeghi, M and Abrinia, K..

        Analysis of the Parameters Affecting Warping In Radial Forging Process

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. Gheisary, M..

        Fracture and spring back on Double Bulge Tube Hydro-Forming

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. Sabeghi, M and Abrinia, K..

        Analysis of the Parameters Affecting Warping In Radial Forging Process

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. Gheisary, M..

        Fracture and spring back on Double Bulge Tube Hydro-Forming

        American Journal of Applied Sciences.
        2008
      • Abrinia, K. Naee, H. Sadeghi, F. and Djavanroodi, F..

        New Analysis for the FGM Thick Cylinders under Combined Pressure and Temperature Loading

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. Gheisary, M. and Zoghi-shal, H.

        Analytical and Numerical analysis of Free Bulge Tube Hydroforming

        American Journal of Applied Sciences.
        2008
      • Gowhari-Anaraki, A. R. Djavanroodi, F. Shadlou, S..

        Estimation of C*-Integral for Radial Cracks in Annular Discs under Constant Angular Velocity and Internal Pressure

        American Journal of Applied Sciences.
        2008
      • Gowhari-Anaraki, A. R. Djavanroodi, F. Shadlou, S.

        Estimation of C*-Integral in a thin T-section subjected to projection and remote loading based on elastic concentration factor

        American Journal of Applied Sciences.
        2008
      • Djavanroodi, F. and Nikbin, K. M..

        The Fracture Mechanics Concept of Creep and Creep/Fatigue Crack Growth in Life Assessment

        International Journal of Engineering Science..
        2006
      • Yahya, S..

        Theoretical Prediction for the Solar Intensity in KSA

        In Press.
        2011
      • Sulaiman AlYahya.

        Utilization of date pits as a potential source of biogas and organic fertilizer

        Food, Agri., and Environment.
        2004 2(2):369-374
      • Sulaiman AlYahya.

        A quick method for measuring date moisture content

        Trans. Of American society for Ag. Engineers,.
        2003 46(2):401-405
      • Sulaiman AlYahya.

        Effect of storage conditions on germination in wheat

        Agronomy and Crop scince.
        2001 J. 186:273-279
      • Irfan, M.A., Schwam, D, Karve, A. and Ryder, R.,.

        Porosity Reduction and Mechanical Properties Improvement in Die Cast Engine Blocks

        Material Science and Engineering- A,.
        2012 Vol. 535 (2012) pp. 108– 114, (Impact Factor 2.319)
      • Ibrahim, U. and Irfan, M.A.,.

        Dynamic Crack Propagation and Arrest in Rapid Prototyping Material

        Rapid Prototyping Journal,.
        2012 Vol. 18:2, 2012. , (Impact Factor 0.662)
      • Irfan, M.A. and Chapman, W.,.

        Thermal Stresses in Radiant Tubes: A Comparison between Recuperative and Regenerative Systems

        Applied Thermal Engineering.
        2010 Vol. 30. Feb 2010. pp. 196-200. (Impact Factor 1.349)
      • Zeb, M.A., Veldhuis, S.C., Irfan, M.A. and Hamid Ullah.

        Comparison Between PVD and CVD+PVD Coated Inserts for Cutting Forces and Tool Wear During Turning of Ramax-2

        Journal of Engineering and Applied Sciences.
        2009 Vol. 28, No.2. 2009. pp. 31-38
      • Zeb, M.A., Irfan, M.A. and Hamid Ullah.

        High Strain Rate Deformation Behavior of AISI 420F

        Journal of Engineering and Applied Sciences,.
        2009 Vol. 28, No.2. 2009. pp. 39-44.
      • Irfan, M.A. and Chapman, W.,.

        Thermal Stresses in Radiant Tubes due to Axial, Circumferential and Radial Temperature Distributions

        Applied Thermal Engineering,.
        2009 Vol. 29. July 2009. pp. 1913-1920. (Impact Factor 1.349)
      • Zeb, M. A. and Irfan, M. A.

        Material Response of RAMAX-2 during HSM using Quick Stop Device

        Experimental Techniques,.
        2009 Vol. 33, No. 2, March/April 2009. (Impact Factor 0.322)
      • Junaid, A., Irfan, M. A., HamidUllah.

        Modeling and Simulation of a Propagating Crack at A Bi-Material Interface under Impact Loading using LS Dyna

        Journal of Engineering and Applied Sciences,.
        2008 Vol. 27, No.1. 2008, pp. 53-61.
      • Martins, C., Irfan, M. A. and Prakash, V.,.

        Dynamic Fracture of Linear Medium Density Polyethylene under Impact Loading Conditions

        Material Science and Engineering A,.
        2007 Volume 465, Issues 1-2, 15 September 2007, pp. 211-222. (Impact Factor 1.490)
      • HamidUllah, Irfan, M. A. and Prakash.

        State and Rate Dependent Friction Laws for Modeling High Speed Frictional Slip at Metal-on-Metal Interfaces

        Journal of Tribology,.
        January 2007 January 2007, Volume 129, Issue 1, pp. 17-22. (Impact Factor 0.541)
      • Hamid Ullah, Bohez, E.L.J. and Irfan, M. A..

        Assembly Features: definition, classification, and usefulness in sequence planning

        International Journal of Industrial and Systems Engineering (IJISE),.
        2009 Vol. 4, No. 2, 2009. pp. 111-132
      • HamidUllah and Irfan, M. A.,.

        Comparison of Linker & Dieterich Friction Models with Prakash Models for Simulation of High-Speed Friction

        Journal of Engineering and Applied Sciences, ,.
        2005 Vol. 24, No.1 Jan- June 2005, pp. 59 – 66.
      • Liou, N. S., Okada, M., Irfan, M. A. and Prakash, V.

        Transient Thermo-mechanical Interactions during High-Speed Slip at Metal-to-Metal Interface

        Optics and Lasers in Engineering,.
        2003 October 2003, Vol. 40, no. 4. pp. 393-437 Elsevier Science. (Impact Factor 0.935)
      • Irfan, M.A. and Prakash, V.

        Dynamic Deformation and Fracture Behavior of Novel Damage Tolerant Discontinuously Reinforced Aluminum Composites

        Intl. J. of Solids and Structures,.
        2000 Vol. 37(33), pp. 4477-4507, August 2000. (Impact Factor 1.378)
      • Irfan, M.A. and Prakash, V.

        Time Resolved Friction During Dry Sliding of Metal on Metal,

        Intl. J. of Solids and Structures,.
        2000 Vol. 37(20) pp. 2859-2882, May 2000. (Impact Factor 1.378)
      • Rajagopalan, S., Okada, M., Irfan, M.A. and Prakash, V.

        Novel Experimental Techniques for Investigating Time Resolved High Speed Friction

        Wear, Vol. 225-229,.
        1999 pp. 1222-1237. 1999. (Impact Factor 1.082)
      • Irfan, M., Pervez, M. and Ahmad, I.

        Optimization of Winding Pattern for Impact Strength of Composite Tube

        Journal of Engineering and Applied Sciences,.
        1992 pp. 19-25, July 1992.
      • Hany Ali Sherif, Samer Kossa.

        Relationship Between Normal and Tangential Contact Stiffness of Nominally Flat Surfaces

        WEAR.
        January 1991 , Vol. 151 , pp.49-62
      • Hany Ali Sherif and Ahmed Shafik Bassiony.

        Non-Linear Identification of Mechanical Systems With Dynamic Dry Friction

        Journal of Sound and Vibration.
        April 1994 Vol. 178 (4), pp. 513-533
      • Hany Ali Sherif and Tayssir Abu Omar.

        Interface Properties Due to Microslip from Vibration Measurement

        ASME Journal of Tribology.
        January 2001 Vol.123, No.1, pp.230-233.
      • Hany Ali Sherif and Tayssir Abu Omar.

        Mechanism of Energy Dissipation in Mechanical Systems with Dry Contact

        Tribology International.
        March 2004 Vol.37, Issue 3, pp.235-244
      • M. Abd-Elwahab and Hany Ali Sherif.

        Pre-tensioned Layer Damping As a New Approach for Vibration Control of Elastic Beams

        ASME Journal of Vibration and Acoustic.
        June 2006 Vol.128 Issue 3, 338
      • Hany Ali Sherif and J.Blouet,J.F.Cretegny, R.Gras, S. Vialard.

        Experimental Investigation of Self-Excited Squeal

        SAE Transactions.
        October 1989 Paper No. 892451, pp. 1855-1863
      • (1)Hany Ali Sherif, (2)Shawki Hegazi, (3)Mostafa Ismail Jacob.

        Assessment of Vehicle Rollover in Lab.

        SAE International.
        12/4 2010 Paper No. 2010-01-0530
      • Abdel-Raheim, A.E. And Seireg A..

        Vibratory Response And Stability Of Systems Driven By Harmonic Drives

        Machine Vibrations.
        1995 Vol. 3, No. 4 (1995), PP 192-199
      • Abdel-Raheim, A.E. Seireg, A..

        On The Vibratory Response And Stability Of Robotic Arms Utilizing Harmonic Drives

        Machine Vibrations.
        1995 Vol. 3, No. 4 (1995), PP 200-208
      • Syed Shakaib Irfan and Rais Ahmad.

        Generalized Multivalued Vector Variational-like Inequalities

        Journal of Global Optimization.
        Vol. 46 (1), 25-30 2010
      • Abul Hasan Siddiqi and Syed Shakaib Irfan.

        Completely Generalized Co-complementarity Problems Involving p-Relaxed Accretive Operators with Fuzzy Mappings

        Nonlinear Analysis and Variational Problems, Edited by Pardalos, Rassias & A. Khan, Springer-Verlag, New York.
        pp. 451-462, 2009
      • Abul Hasan Siddiqi and Syed Shakaib Irfan.

        Algorithm for a New System of Completely Generalized Multi-valued Variational Inclusions

        Modeling of Engineering & Technological Problems, Edited by A. H. Siddiqi, A. K. Gupta and M. Brokate., American Institute of Physics, New York.
        pp.365- 374, 2009
      • Rais Ahmad, Farhat Usman and Syed Shakaib Irfan.

        Mixed Variational Inclusions and T-resolvent Equations with Fuzzy Mappings

        Journal of Fuzzy Mathematics,.
        Vol. 17(2) 437- 450, 2009
      • Rais Ahmad, Abul Hasan Siddiqi and Syed Shakaib Irfan.

        Set-valued Variational Inclusions with Fuzzy Mappings in Banach Spaces,

        Journal of Concrete and Applicable Mathematics,.
        Vol. 4(2), 171-181, 2006
      • Rais Ahmad and Syed Shakaib Irfan.

        On Random Completely Generalized Nonlinear Variational-like Inclusions

        Journal of Applied Functional Analysis.
        Vol. 1(3), 293-302, 2006 ISSN: 1559-1948
      • Rais Ahmad and Syed Shakaib Irfan.

        On Generalized Nonlinear Variational-like Inequality Problems,

        Applied Mathematics Letter.
        Vol. 19(3) 294-297, 2006
      • Rais Ahmad and Syed Shakaib Irfan.

        On Completely Generalized Multivalued Nonlinear Co-quasi-variational-like Inclusions

        Computers and Mathematics with Application.
        Vol. 52 (6-7), 1183-1191, 2006
      • R. Ahmad, Q. H. Ansari and S. S. Irfan.

        Generalized Variational Inclusions and Generalized Resolvent Equations in Banach Spaces,

        Computers and Mathematics with Applications,.
        Vol. (49) 1825-1835, 2005
      • Rais Ahmad, Qamrul Hasan Ansari and Syed Shakaib Irfan.

        On Generalized Mixed Co-quasi-variational Inequalities with Noncompact Valued Mappings

        Bulletin of the Australian Mathematical Society,.
        Vol. (70) 7-15, 2004
      • Salahuddin and Syed Shakaib Irfan.

        An Existance Theorem for General Mixed Multivalued Mildly Nonlinear Variational Inequalities without Convexity,

        Mathematical and Computational Applications,.
        Vol. 9(2) 201-203, 2004
      • Salahuddin, Rais Ahmad and Syed Shakaib Irfan.

        Proximal Methods for Generalized Nonlinear Quasi-variational Inclusions,

        Mathematical and Computational Applications,.
        Vol. 9(2) 165-171, 2004
      • Rais Ahmad, Salahuddin and Syed Shskaib Irfan.

        Generalized Quasi-complementarity Problems with Fuzzy Set-valued Mappings,

        International Journal of Fuzzy Systems.
        Vol. 5(3) 194-199, 2003
      • R. Ahmad, A. Khaliq and S. S. Irfan.

        Completely Generalized Nonlinear Variational-like Inclusions with Noncompact Set-valued Mappings

        Nonlinear Analysis Forum.
        Vol. 7(2) 159-166, 2002
    • لأبحاث الفردية المنشورة في المجلات المحلية أو الإقليمية

      • البدراوى على أبو النصر.

        MECHANICAL PROPERTIES AND FRACTURE BEHAVIOR OF FRICTION STIR WELDED 7075-T6 Al ALLOY

        Kingdom of Saudi Arabia Ministry of Higher Education Qassim University Qassim University Journal of Engineering and Computer Sciences.
        سبتمبر 2010
      • Abdel-Raheim, A.E.

        Applications of Harmonic Drives as power transmission

        Technology and Armament Magazine for Egyptian.
        1998 Vol. 14-1- July 1998. PP 54-58
      • Abdel-Raheim, A.E. ..

        On the Dynamic Response of Prestretched Steel Cables: Comparative Study

        Technology and Armament Magazine for Egyptian.
        1999 Vol. 15-1- July 99, PP. 67-78
      • Irfan Ullah.

        Performance evaluation of a continuous simulated annealing method relative to pure random search on global optimization problems

        Journal of Engineering & Applied Sciences,University of Engineering and Technology Peshawar.
        July-Dec 1997 Vol. 16, No. 2
      • Irfan Ullah.

        Automatic recognition of objects of similar shape but different size, orientation, and location

        Journal of Engineering & Applied Sciences,University of Engineering and Technology Peshawar.
        Jan-June 1999 Vol. 18, No. 1
      • Irfan Ullah.

        The Fourier Deviation method for comparing shapes of coupler curves in synthesis of planar mechanisms

        Journal of Engineering & Applied Sciences,University of Engineering and Technology Peshawar.
        July-Dec 1995 Vol. 14, No.2
    • الأبحاث المشتركة المنشورة في المجلات المحلية أو الإقليمية

      • Yahya, S..

        Separation of wheat- fines mixtures by miniaspirator cleaning machine

        J. King Abd Alaziz Univ.: Met., Env., Arid Land Agric. Sci., Vol. 4. pp 111-121 (Saudi Arabia).
        1993
      • Yahya, S..

        Mathematical simulation model to predict storage time of grain

        J. of College of Agric. King saud univ. 8(1) : 71-84. (Saudi Arabia).
        1995
      • Yahya, S..

        Calibration of grain moisture content measurement devices for wheat

        J. of College of Agric. King saud univ. 8(2) :191-200 . (Saudi Arabia).
        1995
      • Yahya, S..

        Losses of corn in the storage

        Arab Gulf journal of Scientific Research 13(1):200-212(Saudi Arabia).
        1995
      • Rais Ahmad and Syed Shakaib Irfan.

        Three Step Iterative Algorithm for Generalized Variational Inclusions,

        Journal of Natural Science and Mathematics,.
        Vol. 3(2) 119- 127, 2009
  • الأبحاث المقبولة للنشر بالمجلات العلمية

    • الأبحاث الفردية المقبولة للنشر في المجلات الدولية

      • Fahad Al-Mufadi.

        Optimization of preform die shape for forging AA2017 turbine disk using electrostatic field theory

        Research Journal of Applied Sciences, Engineering and Technology.
        2014 Subject: Evaluation Report of Article # 13225-RJASET-DOI
    • الأبحاث المشتركة المقبولة للنشر في المجلات الدولية

      • Fahad Al-Mufadi, F. Djavanroodi.

        Impact property of ultra fine grain copper

        Research Journal of Applied Sciences, Engineering and Technology.
        2014
      • Elamir Samy Gadelmawla, Fahad A. Al-Mufadi, Abdualaziz S. Al-Aboodi.

        Calculation of the Machining Time of Cutting Tools from Captured Images of Machined Parts Using Image Texture Features

        Part B, Journal of Engineering Manufacture.
        2013
      • Elamir Samy Gadelmawla, Fahad A. Al-Mufadi, Abdualaziz S. Al-Aboodi.

        Calculation of the Machining Time of Cutting Tools from Captured Images of Machined Parts Using Image Texture Features

        Part B, Journal of Engineering Manufacture.
        2013
      • Yahya, S. and Irfan, M.A.,.

        Developing an Ecosystem for Quality Education in Qassim University

        European Journal of Social Sciences.
        2013 Vol.37, Issue 2
      • Sulaiman Al Yahya.

        The Techno-Economic Potential of Saudi Arabia's Solar Industry

        Renewable and Sustainable Energy Revie.
        2016 http://authors.elsevier.com/a/1S9DG4s9HvhNHJ
      • Fahad Almufadi, Mohammad A. Irfan.

        Effect of cooling rates on the three-dimensional porosity in permanent mold castings measured by computed tomography

        Materials Evaluation.
        2014
      • Syed Shakaib Irfan and Rais Ahmad.

        Three step iterative algorithm for random generalized variational inclusions with random fuzzy mapping

        Indian Journal of Industrial & Applied Mathematics.
        2010
      • Hany Ali Sherif and A.A. Roshdi , R.H. Khodary.

        Comparative Study of Techniques used for Gearbox Diagnosis

        SAE international.
        2011
      • Rais Ahmad, Syed Shakaib Irfan.

        On Completely Generalized Multi-valued Co-variational Inequality Involving Strongly Accretive Operators

        Filomat.
        2011
      • M. Janbakhsh, F. djavanroodi, M. Riahi.

        Utilization of bulge and uni-axial tensile tests for determination of flow stress curves of selected anisotropic alloys

        Journal of Materials: Design and Applications.
        2012
      • B. Omranpour, F. Djavanroodi.

        Artificial neural network modeling of ECAP process

        Journal of Materials and Manufacturing Processes..
        2012
      • Djavanroodi, B. Omranpour, M. Ebrahimi , M. Sedighi.

        Designing of ECAP parameters based on strain distribution uniformity

        Progress in Natural Science: Materials International.
        2012
      • H. Pirali, F. Djavanroodi and M. Haghpanahi.

        Combined visibility and surrounding triangles method for simulation of crack discontinuities in meshless methods

        Journal of Applied Mathematics.
        2012
      • M. Janbakhsh, M. Riahi and F. Djavanroodi.

        Determination of biaxial and uniaxial stress-strain relationships for Aluminum alloys considering the anisotropy

        Journal of Advanced Design and Manufacturing Technology (ADMT).
        2012
  • المشاركة في المؤتمرات والندوات وورش العمل

    • المشاركات بالأوراق العلمية كمتحدث مدعو Invited speaker في المؤتمرات والندوات وورش العمل الدولية المحكمة

      • Sulaiman AlYahya and Mohammad A. Irfan.

        Building an Eco System for Quality Education in 8 Years – Qassim University

        QS Maple , Durban, South Africa.
        2012
      • Sulaiman AlYahya and Mohammad A. Irfan.

        Strategizing for Ranking – Qassim University

        QS Apple, Dubai.
        2011
      • Ashitawi, Awbi& Mahyuddin.

        The effect of outdoor conditions and air change rate on particulate matter (PM10) concentration in a classroom equipped with a windcatcher

        Proceedings of ROOMVENT,Busan, Korea.
        2009
    • الأبحاث المنشورة في المؤتمرات والندوات وورش العمل الدولية المحكمة

      • Al-Aboodi, N. Merah, A. R. Shuaib, Y. Al-Nassar and S. S. Al-Anizi.

        FEA OF THE EFFECTS OF INITIAL TUBE-TUBESHEET CLEARANCE, WALL REDUCTION AND MATERIAL STRAIN HARDENING ON ROLLED JOINT STRENGTH

        Proceedings of PVP2006-93202, 2006 ASME Pressure Vessels and Piping Division Conference.
        July 23-27 2006
      • N. Merah, A. Al-Aboodi, A. R. Shuaib, Y. Al-Nassar and S. S. Al-Anizi.

        "COMBINED EFFECTS OF TUBE PROJECTION AND INITIAL TUBE-TUBESHEET CLEARANCE ON ROLLED JOINT STRENGTH",

        Proceedings of AMPT.
        Jul 30-Aug 3 2006 Las Vegas, USA
      • Alshitawi, M., Awbi, H. and Mahyuddin, N..

        A study of PM10 concentration under different ventilation systems in a classroom

        The 11th International Conference on Indoor Air Quality and Climate, Copenhagen, Denmark.
        2008
      • Mahyuddin, Awbi& Alshitawi.

        Investigating carbon dioxide in high occupancy buildings with particular application to classrooms

        The 11th International Conference on Indoor Air Quality and Climate, Copenhagen, Denmark.
        2008
      • Alshitawi, Awbi& Mahyuddin.

        The effect of outdoor conditions and air change rate on particulate matter (PM10) concentration in a classroom equipped with a windcatcher

        Proceedings of ROOMVENT, Busan, Korea.
        2009
      • Alshitawi& Awbi.

        Measurement and prediction of the effect of students activities on airborne particulate concentration in a classroom

        7th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, New York, USA.
        2010
      • Alshitawi& Awbi.

        The Effect Of Human Movement On The Resuspension Of Airborne Particles

            12th International Conference on Indoor Air Quality and climate, Austin, Texas.
        2011
      • Yahya, S..

        Estimating moisture content for date by the oven

        international Conference About Date Palm..
        2000
      • Yahya, S..

        Sugar extraction from Al-Gassim dates in Saudi Arabia.

        international Conference About Date Palm. Assuut Univ, Egypt.
        2000
      • Yahya, S..

        Deterioration rates of wheat as measured by CO2 production

        Annual international Conference for ASAE, Toronto, Canada.
        July .17-19, 1999
      • Yahya, S..

        Strategy of Agricultural Engineering department, college of Agriculture And Veterinary Medicine Gassim

        The fifth Conference for Egyptian Agree-Engendering society , Zagazig Univ., Egypt.
        1997
      • Yahya, S..

        Carbon dioxide evolution of fungicide-treated high moisture corn.

        Annual international Conference for ASAE Chicago U.S.A.
        Jan 21-25, 1992
      • Yahya, S..

        Simulation of natural air drying of fungicide-treated high moisture corn. In lowa

        Annual international Conference for ASAE Chicago U.S.A.
        1992
      • Irfan, M.A., Schwam, D, Karve, A. and Ryder, R.

        Improvement of Mechanical Properties in Die Cast Engine Blocks,

        114th Metalcasting Congress, NADCA, Orlando, Florida, March 20-23, 2010..
        2010
      • Zeb, M. A. and Irfan, M. A.,.

        Adiabatic Shear Bands as Predictors of Strain Rate in HSM,

        Proceedings of 2007 SEM Spring Conference on Experimental Mechanics, Springfield, MA, USA, June 2007..
        2007
      • M. El-Maddah, and Hany Ali Sherif , A. Badawy.

        Modal Characteristics of Half -Cylindrical Shell Assembled With Two Plates Using Receptance Technique

        9th International Conference On Aerospace Sciences & Aviation Technology, ASAT-9, Cairo, Egypt.
        May 2001
      • Fahad A. Al-Mufadi, Jay Gun., Frank Kraft.

        An Investigation of Size Effects in Miniature Hot Extrusion

        Eighth International Aluminum Extrusion Technology Seminar& Exposition.
        May18-21 2004
      • J. Gun., Fahad. Al-Mufadi, B. Meh.

        New Preform Die Design For Microstructure Control in Closed Die Forging

        3rd International Conference and Exhibition on Design and Production of Dies and Molds.
        17-19 June 2004 Turkey
      • A.Al-Aboodi ,Fahad Al-Mufadi.

        Optimum Target Profit-Cost Value For Two Machines In Series :Case of Hybrid Tube –To-Tubesheet Expansion

        International Conference on Manufacturing Science and Technology 2006.
        , 29-30 Aug 2006 Melaka , Malaysi
      • - A.Al-Aboodi , Fahad Al-Mufadi,O Al-Sultan.

        FE Evaluation of Effect of Tubesheet Thickness on the Integrity of the Tube –to – Tubesheet Roller Expansion Joint

        Conference on Applications and Design in Mechanical Engineering ,CADME 2007.
        ,25-26 Oct 2007 Uinersiti Malaysia Perlis, Kangar,Malaysia
      • Hany Ali Sherif.

        Geometric induced instability in drum brakes

        Annual Colloquium on Brakes and Eng. Display, Atlantic City, NJ, USA.
        October 1993 paper No. 933072, pp.2461-2469
      • Hany Ali Sherif and E. Rabeieh, Y.Younis and E. Samir.

        Prediction of Bearing Stiffness Using Modal Analysis of Rotor-Bearing-System

        12th International Congress on Sound and Vibration (ICSV12), Lisbon, Portugal.
        July 2005
      • Hany Ali Sherif and T.Abu Omar,K.s. Eldin.

        Jet Engine Noise Investigation Using Spatial Transformation of Sound Field

        9th AMME International Conference on Applied Mechanics and Mechanical Engineering, Cairo, Egypt.
        May 2000 Vol.1, pp.93-113
      • Hany Ali Sherif and Hassanin Khalil Hassanin.

        Experimental Identification of Role of Disc Vibration in Brake Squeal

        Stcex 2006 Conference, Riyad, Kingdom of Saudi Arabia.
        2 December 2006
      • Hany Ali Sherif and A.Omar.

        Dynamic Sticking of Mechanical Systems in Dry Contact

        10th AMME International Conference on Applied Mechanics and Mechanical Engineering, Cairo, Egypt.
        May 2002 Vol.1, pp.125-129
      • A.A. Roshdi and Hany Ali Sherif, R.H. Khodary.

        Gear Fault Detection Using Wavelet Transform

        11th AMME International Conference on Applied Mechanics and Mechanical Engineering, Cairo, Egypt.
        November 2004 Vol.1, pp.145-160
      • البدراوى على أبو النصر.

        FATIGUE RESISTANCE OF CORRODED 7075 Al ALLOY AFTER ROLLER BURNISHING PROCESSES

        FIFTH ASSIUT UNIVERSITY INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING ADVANCED TECHNOLOGY FOR INDUSTRIAL PRODUCTION.
        29-31 مارس 2011
      • البدراوى على أبو النصر.

        MICROSTRUCTURE CHANGES OF Al-6%Ti ALLOY AFTER HOT EXTRUSION AND ELEVATED TEMPERATURE CREEP

        FIFTH ASSIUT UNIVERSITY INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING ADVANCED TECHNOLOGY FOR INDUSTRIAL PRODUCTION.
        29-31 مارس 2011
      • Abdel Mohsen A.S., Imam E.I., Abdel-Raheim.

        On the Inverse Kinematics of Robot Manipulators

        1- 4th Alexandria Univ. Production Engineering Design and Control Conf. Cairo, Egypt, Dec. 1989..
        12 1989
      • Abdel Mohsen A.S., Abdel-Raheim A.E.,.

        Assessment of Inverse Kinematics Algorithms for Robot Manipulators with Resolved Motion Rate Control

        Third International Ain Shams Univ. Conf. on Prod. Engineering and Design for Development, Cairo, Dec. 1990..
        12 1990
      • Abdel-Raheim, A.E., Abdelmohsen, A.S. and Afifi, Badr.

        An Enhanced Control System For The Arm Joints of a Six Joint Manipulator

        12th International Conference on CAD\CAM robotics and factories for the Future, Middlesex University, London, UK, Aug. 1996..
        Aug 1996
      • Abdel-Raheim, A.E..

        Structural Dynamic Analysis of a Two Link Manipulator Model Part 1: Experimental and analytical investigation

        13th International Conference On CAD\CAM Robotics And Factories For The Future, 15-17 Dec. 97, Universidad Technologica de Pereira, Colombia, South America..
        Dec 1997 13th International Conference On CAD\CAM Robotics And Factories For The Future, 15-17 Dec. 97, Universidad Technologica de Pereira, Colombia, South America. pp874
      • Abdel-Raheim, A.E. ..

        Structural Dynamic Analysis of a Two Link Manipulator Model Part 2: Finite Element Modeling and Result Verifications

        13th International Conference On CAD\CAM Robotics And Factories For The Future, 15-17 Dec. 97, Universidad Technologica de Pereira, Colombia, South America..
        Dec 1997 13th International Conference On CAD\CAM Robotics And Factories For The Future, 15-17 Dec. 97, Universidad Technologica de Pereira, Colombia, South America.pp 880
      • Abdel-Raheim, A.E. ..

        Structural Dynamic Analysis of a Two Link Manipulator Model Part 2: Finite Element Modeling and Result Verifications

        13th International Conference On CAD\CAM Robotics And Factories For The Future, 15-17 Dec. 97, Universidad Technologica de Pereira, Colombia, South America..
        Dec 1997 13th International Conference On CAD\CAM Robotics And Factories For The Future, 15-17 Dec. 97, Universidad Technologica de Pereira, Colombia, South America.pp 880
      • Abdel-Raheim, A.E., Abdelmohsen, A.S..

        Analysis Of A Beam Like Structure Utilizing The Finite Deformation Model: A Case Study

        1- 39th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics, and Materials Conference, 20-23 April 1998- California, USA..
        April 1998 1- 39th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics, and Materials Conference, 20-23 April 1998- California, USA.
      • Abdel Mohsen A.S., Imam E.I., Abdel-Raheim.

        Application Of Duhamel’s Integral In Calculating The Response Of Prestretched Cable Subjected To Moving Load

        50th International Astronautical Congress - Amsterdam, Netherlands, Oct. 4-8, 1999.
        Oct 1999 1- Paper ref. # IAF-99-1.4.03,
      • Abdelraheim A.E., Sherief Seliem.

        Hands On The Use Of The Phase-Plane Method In Calculating The Time Response Of Nonlinear Systems

        9th Int. Conf. on Applied Mechanics and Mechanical Engineering (AMME), Military Technical College, 16-18 May 2000.
        May 2000 pp-51-61
      • Abdelraheim, A.E. , Metwally M., Amro Al-Hefnawy.

        A Parametric Study on Vehicle Suspension

        The 10th International Conference on Applied Mechanics and Mechanical Engineering (AMME), Military Technical College, 14-16 May 2002.
        May 2002 pp393
    • الأبحاث المنشورة في المؤتمرات والندوات وورش العمل المحلية أو الإقليمية المحكمة

      • Yahya, S..

        -Quality change of Barhy dates during storage at Bisir stage

        Annual Meeting for Saudi biological society No. 19.
        1999
      • Yahya, S..

        Storage of wheat with kernels. -Head of Agricultural engineering and soil science session.

        Annual Meeting for Saudi biological society No. 19.
        1999
      • Yahya, S..

        Innovation of an implement for rooting out young palm trees.

        Annual Meeting for Saudi biological society No. 18.
        1998
      • Yahya, S..

        Static pressure drop through stored barley grain.

        Annual Meeting for Saudi biological society No. 17.
        1996
      • Yahya, S..

        Development of seed drill to suit the small seeds sowing at sandy soil. -Head of Agr. Engineering session

        Annual Meeting for Saudi biological society No. 17.
        1996
      • Yahya, S..

        Methods of evaluation of harvesting and drying of Alfalfa

        Annual Meeting for Saudi biological society No. 16.
        1995
      • Yahya, S..

        Natural grain drying under arid region condition of Saudi Arabia

        Annual Meeting for Saudi biological society No. 16.
        1995
      • Yahya, S..

        Calibration of Grain moisture content measurement devices for wheat.

        Annual Meeting for Saudi biological society No. 15.
        March 29-31, 1994
      • Yahya, S..

        Summaries of dry and wet bulb temperatures in Saudi Arabia.

        Annual Meeting for Saudi biological society No. 15.
        1994
      • Yahya, S..

        Estimating moisture content for dates by the oven

        Annual Meeting for Saudi biological society No. 14.
        1993
      • Yahya, S..

        Separation of wheat-fines mixture by miniaspirator machine.

        Annual Meeting for Saudi biological society No. 13.
        1992
      • Yahya, S..

        Effect of temperature and container on stored dates.

        Annual Meeting for Saudi biological society No. 13.
        1992
      • Yahya, S..

        Physical and chemical changes on Sukary and Barhy dates during storage.

        Annual Meeting for Saudi biological society No. 13.
        1992
      • Yahya, S..

        Development of water resources and irrigation systems in Saudi Arabia

        The big symposium regarding passage of 100 years for establishment of the kingdom of S.A..
        1999
      • Yahya, S..

        Effect of rotary plough on sandy soil fertility.

        The big symposium regarding passage of 100 years for establishment of the kingdom of S.A..
        1999
    • المشاركات بالبحوث كملصقاتPosters في المؤتمرات والندوات وورش العمل الدولية المحكمة

      • Sulaiman AlYahya.

        Deterioration rates of wheat as measured by CO2 production.

        Annual international Conference for ASAE, Toronto, Canada.
        1999
      • Sulaiman AlYahya.

        Estimating moisture content for date by the oven

        International Conference About Date Palm, Asut University, Egypt.
        1999
      • Sulaiman AlYahya.

        Sugar extraction from Al-Gassim dates in Saudi Arabia

        International Conference About Date Palm., Assut Univ, Egypt.
        1999
    • المشاركات بالبحوث كملخصات Abstracts

      • Almarshoud, Gadelmawla, Abdelraheim and K. Esmaeil.

        "Development of a Control and Evaluation Strategy for the Coop Training Program at the College of Engineering in Qassim University

        1- 5th International Forum on Engineering Education (IFEE2010) Engineering Education in the 21st Century - Quality, Globalization and Local Relevance.
        2010 ED-1-105
  • المشاريع البحثية والأنشطة العلمية في تنفيذ برامج بحثية

    • مشاريع بحثية وطنية مدعومة دوليا أو محليا

      • Ismail M. Youssef.

        Design a Filter to reduce the harmful gases from combustion engine

        QASEEM UNIVERSITY - Scientific Research Deanship.
        مايو 2010 2011
      • د/ إسماعيل محمد يوسف & د/ محمد بن صالح الشتيوي.

        Measurement and prediction of the effect of workers’ activities on airborne particulate concentration in office rooms

        Qassim University - Scientific Research Deanship.
        ابريل 2011 2012
      • Mohammad A. Irfan, Fahad Almufadi, Khaled AlKhodery.

        Energy Audits and Developing Energy Efficiency Plans for Local Industry

        NSTIP/ KACST.
        Sept 14 2014
    • مشاريع بحثية من جهات مانحة محلية (منح كبيرة)

      • Mohammad A Irfan.

        Rapid crack propagation & arrest in Rapid Prototyping Materials(2007-2008)

        NWFP university of Engineering and Technology.
        2007 2008
      • Mohammad A Irfan.

        Development of Novel Apparatus for testing Rapid Crack Propagation

        NWFP university of Engineering and Technology.
        2004 2006
    • مشاريع بحثية من جهات مانحة محلية (منح صغيرة)

      • Mohammad A Irfan , Fahad Al Mufadi.

        Effect of enhanced cooling rates on 3D porosity measured by CT Scan in Permanent Mold Castings

        Qasim Univeristy.
        2012 2012 2013
      • Mohammad A Irfan, Fahad A Almufadi, Khaled Khodery.

        Pilot Study of Industrial Waste Heat Recovery

        SABIC.
        2014 2015
      • Fahad Al-Mufadi, Mohammad A. Irfan.

        To study effect of cooling rates on 3D porosity in Permanent Mold Castings

        عمادة البحث العلمي جامعة القصيم.
        2012 2012
  • تنظيم المؤتمرات والندوات وورش العمل

    • اللجان العلمية في المؤتمرات والندوات وورش العمل المحلية الإقليمية

      • Mohammad A Irfan, Fahad A Almufadi, Khaled Khodery.

        Energy Audits

        Industrial Energy Audits.
        February 2016 1 - Day wrokshop for engineers from industry
    • المساهمات في تحكيم البحوث

      • Mohammad A Irfan.

        Mechanical Engineering

        Journal of Mechanical Science and Technology.
        2010
  • الإشراف على رسائل الماجستير والدكتوراه

    • رسائل الدكتوراه الممنوحة

      • Mohammad A Irfan,.

        Effect of cooling rates on the three-dimensional porosity in permanent mold castings

        University of Engineering and Technology, Peshawar, Pakistan.
        2009 Dec 2015
      • Mohammad A Irfan.

        Effect of High Strain Rate on Material Response During High-Speed Machining of Stainless Steel

        NWFP university of Engineering and Technology.
        2003 2007
      • Hany Ali Sherif.

        Spatial transformation of sound field of jet engine

        Military Technical College.
        January 1997 2000
      • Hany Ali Sherif.

        Analysis of Squeal Noise Using Non-Stationary STSF

        Military Technical College.
        January 2003 2007
    • رسائل الماجستير الممنوحة

      • Hany Ali Sherif.

        Application of advanced techniques for fault detection in gearboxes

        Military Technical College.
        January 2002 2004
      • Hany Ali Sherif.

        Analysis and modeling of vehicle rollover

        Military Technical College.
        January 2003 2005
      • Hany Ali Sherif.

        Theoretical and experimental analysis of squeal in drum brakes

        Military Technical College.
        January 1989 1991
      • Hany Ali Sherif.

        Transient response of friction joints

        Military Technical College.
        January 1994 1996
      • Hany Ali Sherif.

        Steady response of shrouded blades in jet engines

        Military Technical College.
        January 1996 1998
      • Hany Ali Sherif.

        Dynamics of buried structures

        Military Technical College.
        October 1999 2001
      • Hany Ali Sherif.

        6) Active and passive control of mechanical vibration of cantilevered beam

        Military Technical College.
        October 2000 2002
      • Hany Ali Sherif.

        Crack Detection Using Advanced Measuring Techniques

        Military Technical College.
        January 2005 2007
      • Mohammad A Irfan.

        Rapid Crack Propagation and Arrest in RP material

        NWFP university of Engineering and Technology.
        2006
      • Mohammad A Irfan.

        Design of Mine Removing Hoe

        NWFP university of Engineering and Technology.
        2007
    • رسائل الدكتوراه التي لم تنته بعد

      • Mohammad A Irfan.

        Effect of Cooling Rate on Porosity of Die Castings

        NWFP university of Engineering and Technology.
        2007
  • الحصول على براءات الاختراع والجوائز والشهادات

    • الجوائز المحلية

      • Syed Shakaib Irfan.

        The University Prize for the Best Research Paper in Applied Researches

        Qassim University.
        2009
    • شهادات التقدير المحلية

      • البدراوى على أبو النصر.

        درع جامعة القصبم

        جامعة القصبم.
        19 أبريل 2011
  • المشاركة في خدمة المجتمع والبيئة دوليا وإقليميا

    • الاستشارات والدراسات العلمية المقدمة لجهات خارجية وداخلية

      • Mohammad A Irfan.

        Industrial Waste Heat Recovery

        NWFP university of Engineering and Technology.
        2009
    • الدورات التدريبية الذي قام بإعدادها وتقديمها

      • د. فيصل المحروقي.

        دورة عن القيادة

        مركز القيادة الأكاديمي.
        20/4 2014
  • عضوية اللجان والمجالس العلمية الدولية والوطنية والأكاديمية

    • الاشتراك في اللجان والمجالس العلمية الوطنية أو الإقليمية والأكاديمية

      • د. أحمد الطامي.

        لجنة الخطط

        وكالة السؤون التعليمية.
        5/5 2013
      • د. عبد الله الصالحي د. فيصل المحروقي.

        لجنة التعاملات الإلكترونية

        عمادة تقنية المعلومات.
        3/2 2014
      • د. عبد الله الصالحي د. فيصل المحروقي.

        لجنة التعاملات الإلكترونية

        عمادة تقنية المعلومات.
        3/2 2014
      • فيصل المحروقي.

        التدريب والإبتعاث

        جامعة القصيم.
        2014 2014
      • فهد عبدالرحمن المفضي.

        لجنة الابتعاث لجامعة القصيم

        جامعة القصيم.
        2014 2013
      • فهد المفضي.

        لجنة التصنيف العالمي

        جامعة القصيم.
        2013 2013
      • د. فيصل المحروقي.

        لجنة التطوير لعمداء التطوير في المملكة

        الرياض جامعة الإمام.
        5/6 2014
      • Sulaiman AlYahya.

        Member of the permanent committee for scholarship and training,

        Qassim University.
        2004-2010 2010
      • Sulaiman AlYahya.

        Member of the higher committee for Qassim Branch, KSU

        Qassim.
        2002-2004 2004
      • Sulaiman AlYahya.

        Member of the council center of prince Abd-Allah for Research in KSU university in Riyadh

        Riyadh.
        1998-2003 2003
      • Sulaiman AlYahya.

        Head of Committee for reconstructing the CAVM programs

        College of Agriculture and Vetrinary Medicine, Qassim.
        1999-2001 2001
    • الاشتراك في هيئة التحرير أو الهيئة الاستشارية للجمعيات العلمية والمجلات العلمية الدولية

      • Journal of Mechanical Science and Technology.

        Associate Editor

        Korea.
        2010
      • F. Djavanroodi.

        Elsevier : Materials Science and Engineering A

        USA.
        2012 referee
      • F.Djavanroodi.

        Elsevier : Material & Design

        USA.
        2012 Referee
  • أي معلومات إضافية لم تذكر في الاستمارة حسب الترتيب السابق

    • الأعمال البحثية الحالية والتي لم تنشر أو تقبل للنشر

      • A.F. Almarshoud1, E.S. Gadelmawla2, A.E. Abdelraheim2, and K.K. Esmaeil2.

        DEVELOPMENT OF A CONTROL AND EVALUATION STRATEGY FOR THE COOP TRAINING PROGRAM AT THE COLLEGE OF ENGINEERING IN QASSIM UNIVERSITY

        5th International Forum on Engineering Education (IFEE2010).
        23-25 November 2010
      • Abdul Aziz A. Morgan.a and Fahad A. Al-Mufadi.

        A Novel Method to Improve Weld Uniformity by Automatic Control of Current Intensity

        Journal of Mechanical Science and Technology.
        2013
      • , Mohammad Sajid,Fahad AlMufadi, Mirza Jahanzaib.

        Chaotic behavior in Flexible Assembly Line of Manufacturing System

        JMSE.
        2013
      • د. فيصل المحروقي د. فهد المفضي.

        الإبداع واثره على طلاب الهندسة

        مازال.
        1/1 2014
    • أعمال أخري يريد الباحث إضافتها

      • Mohammad A. Irfan, Abdul Aziz AlHanaya, Muath AlDajan, Mazyd Saud.

        To Conduct Eco Audit of Hana Water Factory

        SDP Project Report, Mechanical Department, College of Engineering, Qassim University.
        2013
      • د. فيصل المحروقي.

        الإبداع وعلاقته بالهندسة

        مازال.
        5/5 2014
      • Ismail M. Youssef.

        Assessment of safety condition for running motor vehicles and drivers in upper Egypt

        undefined - near to send and get acceptance.
        2012 Still not complete
 
 
  عدد زيارات هذا الموقع 4988144
جميع الحقوق محفوظة لعمادة البحث العلمي بجامعة القصيم ©